2024-04-15T22:36:41Z
https://u-ryukyu.repo.nii.ac.jp/oai
oai:u-ryukyu.repo.nii.ac.jp:02000827
2023-08-03T05:34:50Z
1642838163960:1642838338003
1642838403551:1642838406845
延性き裂の安定成長挙動について
A Consideration of Stable Growth of a Ductile Crack
真壁, 朝敏
村上, 敬宜
Makabe, Chobin
Murakami, Yukitaka
open access
Copyright (c) 1987 日本機械学会
Fracture
Stable Fracture
Ductile Crack
Strain Distribution
Grid Sheet
Crack Shape
Tensile Test
70 30 Brass
The deformation of a ductile crack and the strain distribution in the vicinity of the crack tip were investigated in order to study the stable growth process of a crack in a center-cracked plate of 70/30 brass. Specimens which have a short fatigue crack in its center were prepared so that the outer boundaries of the specimens did not disturb the substantial characteristics of the strain distribution near the crack tip. The distribution of strain, ε_y, in the tensile direction near the crack tip is approximately expressed by the following equation regardless of the crack length, a. ε_y≌C_1ε_f(a/r)^β (C_1≌0.10～0.13, β≌0.4～0.5, 0.01≲r/a≲0.5) where ε_f is the fracture ductility in the tensile test of a round bar and r is the distance from the crack tip. The crack opening displacement, δ(x), near the crack tip has a unique correlation with the distance, x, from the crack tip, that is,δ(x)∝x/a These two equations imply that the following equation holds between the rate of crack growth, da, due to the increase in external loading and the crack length, a, i. e. da/dε_0∝a where ε_0 indicates the external average strain defined by a gauge length of 20 mm.
論文
日本機械学会
1987-02-25
jpn
journal article
VoR
http://hdl.handle.net/20.500.12000/134
http://hdl.handle.net/20.500.12000/134
https://u-ryukyu.repo.nii.ac.jp/records/2000827
03875008
AN0018742X
日本機械学会論文集. A編
Transactions of the Japan Society of Mechanical Engineers. A
53
486
261
266
https://u-ryukyu.repo.nii.ac.jp/record/2000827/files/makabe_c10.pdf