2024-03-29T08:11:03Z
https://u-ryukyu.repo.nii.ac.jp/oai
oai:u-ryukyu.repo.nii.ac.jp:02007422
2022-10-31T03:20:39Z
1642837622505:1642837722116:1642837727106
1642838403551:1642838406845
登窯用集じん装置の試作
On the Dust Collector for 'Nobori-gama'
屋富祖, 建樹
伊良部, 邦夫
永井, 實
島尻, 徳三
Yafuso, Tateki
Irabu, Kunio
Nagai, Minoru
Shimajiri, Tokuzo
open access
Models of dust collector for Nobori-gama (a uphill kiln for china) were constructed on the consignment of Okinawa Prefectural Office. Two types of scrubbing and electric dust collector models were built. Collection efficiency of the scrubbing dust collector was about 50 to 60 per cent. And large particles of the dust arisen from the combustion of heavy oil, among which the largest grain is to 2 or 3mm diameter, were almost perfectly cleared by the equipment. Small particles about 10μ or smaller, however, could not be collected by the scrubbing. Although electric collector is suit to such a small mist, its capacity is less than the scrubbing collector. So designed combination type of scrubbing and electric dust collector was produced as a trial plant.
紀要論文
琉球大学理工学部
Science and Engineering Division, University of the Ryukyus
1976-03-01
jpn
departmental bulletin paper
VoR
http://hdl.handle.net/20.500.12000/26609
http://hdl.handle.net/20.500.12000/26609
https://u-ryukyu.repo.nii.ac.jp/records/2007422
0387-429X
AN00250785
琉球大学理工学部紀要. 工学篇
Bulletin of Science & Engineering Division, University of the Ryukyus. Engineering
11
1
7
https://u-ryukyu.repo.nii.ac.jp/record/2007422/files/No11P001.pdf