2024-03-28T21:18:25Z
https://u-ryukyu.repo.nii.ac.jp/oai
oai:u-ryukyu.repo.nii.ac.jp:02007445
2022-10-31T03:21:02Z
1642837622505:1642837722116:1642837728262
1642838403551:1642838406845
平行直線刃による両面せん断加工の研究 (細長比の大きいポンチによる両面せん断)
Study on Shearing by Parallel and Straight Cutting Edges (Double-side Shearing by Using Punches with High Slenderness Ratio)
銘苅, 春栄
Mekaru, Shunei
open access
The life of shearing tool is usually determined by the degree of steady wear which increases as the number of operations increases. Especially in case of the punches with high slenderness ratio, the bending or breakage of the punches shortens the service life, and this fact hinders smooth operation. The fundamental research presented here was carried out to make clear the causes of bending and breakage of the slender punches in order to prolong the tool life. In this paper the author will report and discuss about the theoretical analyses and experiments concerning the several kinds of punch bending caused by the unbalance between shearing force and side force on both sides of the double shearing punch.
紀要論文
琉球大学理工学部
Science and Engineering Division, University of the Ryukyus
1977-03-28
jpn
departmental bulletin paper
VoR
http://hdl.handle.net/20.500.12000/26794
http://hdl.handle.net/20.500.12000/26794
https://u-ryukyu.repo.nii.ac.jp/records/2007445
0387-429X
AN00250785
琉球大学理工学部紀要. 工学篇
Bulletin of Science & Engineering Division, University of the Ryukyus. Engineering
13
11
24
https://u-ryukyu.repo.nii.ac.jp/record/2007445/files/No13P011.pdf