2024-03-28T15:31:12Z
https://u-ryukyu.repo.nii.ac.jp/oai
oai:u-ryukyu.repo.nii.ac.jp:02000820
2023-08-03T05:39:32Z
1642838163960:1642838338003
1642838403551:1642838406845
疲労き裂伝ぱ過程における過大荷重負荷履歴の検知手法
A Detection Method of Overloading History during Fatigue Crack Propagation Stage
真壁, 朝敏
末吉, 敏恭
Purnowidodo, Anindito
宇都宮, 登雄
Makabe, Chobin
Sueyoshi, Toshiyasu
Purnowidodo, Anindito
Utsunomiya, Takao
Fatigue
Crack Propagation
Overload
Stress Ratio
Detection
Strain Waveform
In the present study a detection method of an overload application during stress cycles under constant amplitude was investigated. Also, the effect of a tensile overload was shown at three stress ratios: R = 0, -1.5, in order to understand the effects of R on crack propagation after an overload. At a baseline of R = 0, after an overload retardation in the crack propagation was observed. However, in the case of R = -1.5, the fatigue crack growth rate actually accelerated after a tensile overload. That behavior of crack propagation was tried to be detected by the information of strain waveform h; h = ε_y + 1.2λε_x, where, ε_y and ε_x are the local strains at the specimen axis, and λ is the strain range ratio Δε_y/Δε_x. The waveform shape of h was changed after the overloading. Also, the application of an overload can be detected by the variation of the strain range ratio λ. Specially, the present method is useful for cases of the crack propagation stage under negative R conditions.
論文
http://purl.org/coar/resource_type/c_6501
日本機械学会
2003-03-25
VoR
http://hdl.handle.net/20.500.12000/130
03875008
AN0018742X
日本機械学会論文集. A編
Transactions of the Japan Society of Mechanical Engineers. A
679
69
146
140
jpn
open access
Copyright (c) 2003 日本機械学会