2024-03-28T20:04:49Z
https://u-ryukyu.repo.nii.ac.jp/oai
oai:u-ryukyu.repo.nii.ac.jp:02003456
2022-10-31T01:22:31Z
1642837622505:1642837905044:1642837907759
1642838403551:1642838407312
サトウキビ収穫機に関する研究(第 2 報) : 茎稈の切断抵抗について(農業工学科)
Studies on the Sugarcane Harvester Part II : the Cutting Resistance of Sugarcane Stallk (Department of Agricultural Engineering)
泉, 裕巳
Izumi, Hiromi
The resistance of sugarcane stalks to static and dynamic cuttings was measured by an experimentally constructed apparatus. Sugarcane stalks were dynanically cut by rotary cutter of fixd of a shaft (Fig 7) The cutting was experimented at six cutting angles in a range of 0°to 50°, and at five cutting speeds in a range of 17 to 21 meters per second. The shape of cut ends of the sugarcane was examined as affected by the cutting angle and speed. The results obtained were in the following. When sugarcane stalks were statically cut, their resistance inereased with the circumference of the stalks. The relationship was expressed as Y=9,967+11,783 X where Y was the resistance and X the circumference of sugarcane stalks. (Fig 3) The appropreate speed was 20 meters per second in the dynamic cutting. The best cutting angle was 40°with 25°of the wedge angle to obtain the minimum resistance. In the dynamic cutting the angle of action desreased with increasing cutting angle as the wedge angle was kept constant, and so decreased was cutting torque accordingly. The cutting torque was 0.8m-kg at 40°of the cutting angle and 20 meters per second of the cutting speed in the present experiment.
紀要論文
http://purl.org/coar/resource_type/c_6501
琉球大学農学部
1971-12-01
VoR
http://hdl.handle.net/20.500.12000/4488
0370-4246
AN00250548
琉球大学農学部学術報告
The Science Bulletin of the Faculty of Agriculture. University of the Ryukyus
18
87
73
jpn
open access