Item type |
デフォルトアイテムタイプ(フル)(1) |
公開日 |
2007-03-04 |
タイトル |
|
|
タイトル |
表面欠陥を起点とする延性破壊の機構と破断延性評価 : 単一穴を有する試験片の場合 |
|
言語 |
ja |
タイトル |
|
|
タイトル |
Mechanism of Ductile Fracture Originating in Surface Defect and Evaluation of Fracture Ductility : Case of Specimen Having a Single Hole |
|
言語 |
en |
作成者 |
真壁, 朝敏
宮城, 清宏
呉屋, 守章
糸村, 昌祐
Makabe, Chobin
Miyagi, Kiyohiro
Goya, Moriaki
Itomura, Shosuke
|
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
権利情報 |
|
|
言語 |
ja |
|
権利情報 |
Copyright (c) 1995 日本機械学会 |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Ductile Fracture |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Ductility |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Crack Initiation |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Crack Growth |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Shear Mode Fracture |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Area Fraction of Crack |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Hole |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
Tensile fracture tests of specimens having a single blind hole were carried out in order to investigate the mechanism of ductile fracture originating in a surface defect. Although a crack was initiated at the hole edge, the true stress-true strain curve of the holed specimen approximately coincided with that of the plain specimen with no hole untill the true stress reached a maximum value. In the deformation stage of the specimen after this stress value was reached, the growth behavior of the crack was not affected by the deformation of the hole. On the basis of these phenomena, parameter f_<ac> was defined by the ratio of crack area to minimum cross section of the specimen at which the true stress reached the maximum value, and the effect of hole size on the fracture ductility was examined using the parameter f_<ac>. The ture strain ε_c at the point of maximum true stress showed good correlation with the parameter f_<ac>, and the shear mode growth of the crack started unstably at this point. The relation between the fracture ductility ε_f and the parameter fαc was predicted from the relation between ε_c and f_<ac> and from the growth behavior of the crack. This relation coincided with the experimental results, and it was found that the fracture ductility ε_f of the present experiment is determined mainly by the starting conditions of unstable fracture and the growth behavior of the crack. |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
論文 |
出版者 |
|
|
言語 |
ja |
|
出版者 |
日本機械学会 |
出版者 |
|
|
言語 |
en |
|
出版者 |
the Japan Society of Mechanical Engineers |
言語 |
|
|
言語 |
jpn |
資源タイプ |
|
|
資源タイプ |
journal article |
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
識別子 |
|
|
識別子 |
http://hdl.handle.net/20.500.12000/143 |
|
識別子タイプ |
HDL |
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
03875008 |
収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AN0018742X |
収録物名 |
|
|
言語 |
ja |
|
収録物名 |
日本機械学会論文集. A編 |
収録物名 |
|
|
言語 |
en |
|
収録物名 |
Transactions of the Japan Society of Mechanical Engineers. A |
書誌情報 |
巻 61,
号 592,
p. 15-22,
発行日 1995-12-25
|