Item type |
デフォルトアイテムタイプ(フル)(1) |
公開日 |
2007-03-04 |
タイトル |
|
|
タイトル |
十字形噴流の衝突熱伝達 |
|
言語 |
ja |
タイトル |
|
|
タイトル |
Impingement Heat Transfer by Jet Issuing from Cross-Shaped Nozzle |
|
言語 |
en |
作成者 |
親川, 兼勇
屋我, 実
那須, 謙一
瀬名波, 出
松田, 昇一
安座間, 工
Oyakawa, Kenyu
Yaga, Minoru
Nasu, Kenichi
Senaha, Izuru
Matsuda, Shoichi
Azama, Takumi
|
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
権利情報 |
|
|
言語 |
ja |
|
権利情報 |
Copyright (c) 1997 日本機械学会 |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Forced Convection |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Impingement Heat Transfer |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Cross-Shaped Nozzle |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Flow Visualization |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Infrared Image |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Axes Switching |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
Heat transfer characteristics and flow patterns were measured over the plate for various separation distances between the nozzle exit and target plate when the air issuing from a sharpedged cross-shaped nozzle impinges on the plate. The local heat transfer coefficients in the radial direction for different circumferential positions were calculated using the wall temperatures measured by means of thermocouples, and the flow patterns were observed using a oil-titanium IV oxide method. The isotherms of the infrared images were also measured using an infrared radiometer with a two-dimensional array of InSb sensors. The geometric axes were switched due to the self-induced velocity of a vortex filament ; the convex corners became flat and the concave corners generated outward ejection. The distribution of the iso-heat-transfer-coefficient contours corresponds well to the flow pattern and the isotherm contours. These contours extended diagonally and demonstrated the Andrew's cross pattern for the short separations, subsequently becoming the octagonal patten, and then becoming circular at large separations. The correspondence of the heat transfer characteristic to the flow behaviors, and the heat transfer mechanism were also described. |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
論文 |
出版者 |
|
|
言語 |
ja |
|
出版者 |
日本機械学会 |
言語 |
|
|
言語 |
jpn |
資源タイプ |
|
|
資源タイプ |
journal article |
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
識別子 |
|
|
識別子 |
http://hdl.handle.net/20.500.12000/237 |
|
識別子タイプ |
HDL |
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
03875016 |
収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AN00187441 |
収録物名 |
|
|
言語 |
ja |
|
収録物名 |
日本機械学会論文集. B編 |
収録物名 |
|
|
言語 |
en |
|
収録物名 |
Transactions of the Japan Society of Mechanical Engineers. B |
書誌情報 |
巻 63,
号 607,
p. 233-239,
発行日 1997-03-25
|