Item type |
デフォルトアイテムタイプ(フル)(1) |
公開日 |
2012-05-25 |
タイトル |
|
|
タイトル |
FRP材料の引張強さと引張試験片について |
|
言語 |
ja |
タイトル |
|
|
タイトル |
The Fundamental aspect of the FRP tensile test piece and FRP tensile strength |
|
言語 |
en |
作成者 |
真喜志, 康ニ
兼城, 英夫
宮城, 清宏
Makishi, Yasuji
Kaneshiro, Hideo
Miyagi, Kiyohiro
|
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
The test material for experiment is made by combining with Fiber glass and polyester resin which is molded by hand-lay-up method, placing Fiber glass and polyester resin in turn. We studied behavior of the deform and the starting point of demolition aiming to break the test piece at the part of effective range which is produced by the use of the primary test records and the refference books. The results obtained are summarized as follows: 1. In the experiment the uniformed type and size of the test pieces to be broken at the effective range could not be found, however the result of the tests indicated the possible width in the effective range of the test piece if the depth is known. 2. Normally there is not much defference in the strength of tensile if the width of effective range is enlarged except in some unusual occations. 3. It seems to be better to decide an appropriate width of the test piece which will be easily broken in the effective range, considering the small width described in the report, rather than merely enlarging the width of the test piece in the effective range. 4. There seems to no difference between the breaking and the spot failure in the test piece will not cause the break, but the split direction to width will. |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
紀要論文 |
出版者 |
|
|
言語 |
ja |
|
出版者 |
琉球大学理工学部 |
出版者 |
|
|
言語 |
en |
|
出版者 |
Science and Engineering Division, University of the Ryukyus |
言語 |
|
|
言語 |
jpn |
資源タイプ |
|
|
資源タイプ |
departmental bulletin paper |
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
識別子 |
|
|
識別子 |
http://hdl.handle.net/20.500.12000/24516 |
|
識別子タイプ |
HDL |
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0387-429X |
収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AN00250785 |
収録物名 |
|
|
言語 |
ja |
|
収録物名 |
琉球大学理工学部紀要. 工学篇 |
収録物名 |
|
|
言語 |
en |
|
収録物名 |
Bulletin of Science & Engineering Division, University of the Ryukyus. Engineering |
書誌情報 |
号 5,
p. 97-101,
発行日 1972-03
|