Item type |
デフォルトアイテムタイプ(フル)(1) |
公開日 |
2007-03-04 |
タイトル |
|
|
タイトル |
Al合金2017-T4におけるモードIとIIIおよびモードI : IIIの混合モード疲労き裂伝ぱに関して |
|
言語 |
ja |
タイトル |
|
|
タイトル |
Fatigue Crack Propagation of Al Alloy 2017-T4 under Mixed Mode of Modes I and III and Modes I, II and III |
|
言語 |
en |
作成者 |
真壁, 朝敏
玉寄, 博道
兼城, 英夫
Makabe, Chobin
Tamayose, Hiromichi
Kaneshiro, Hideo
|
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
権利情報 |
|
|
言語 |
ja |
|
権利情報 |
Copyright (c) 1995 日本機械学会 |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Fatigue |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Crack Propagation |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Mixed Modes |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Projected Crack Length |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Maximum Principal Stress |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Effective Stress Intensity Factor Range |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
Fatigue crack propagation behavior under the mixed-mode condition which combined modes I and III and modes I, II and III was investigated in a push-pull fatigue test of notched specimen. The notch inclined in the thickness direction was cut at the center of the specimen. Four values were selected for the notch length 2b, that is, 2b=9,15, 25, 35 mm. In the present study, the crack propagation behavior under the mixed modes is assumed to be dominated by the maximum principal stress criterion. The stress intensity factor K_p of mode I was calculated with the projected crack length along the load direction and the crack propagation rate da/dN under the mixed modes was evaluated using it. This stress intensity factor K_p can approximate relatively well the stress intensity factor determined on the basis of the maximum principal stress criterion in the case of the specimen used in the present experiment. The crack propagation rate da/dN can reasonably be evaluated with the effective stress intensity factor range of K_p independent of the applied mean stress. |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
論文 |
出版者 |
|
|
言語 |
ja |
|
出版者 |
日本機械学会 |
言語 |
|
|
言語 |
jpn |
資源タイプ |
|
|
資源タイプ |
journal article |
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
識別子 |
|
|
識別子 |
http://hdl.handle.net/20.500.12000/218 |
|
識別子タイプ |
HDL |
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
03875008 |
収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AN0018742X |
収録物名 |
|
|
言語 |
ja |
|
収録物名 |
日本機械学会論文集. A編 |
収録物名 |
|
|
言語 |
en |
|
収録物名 |
Transactions of the Japan Society of Mechanical Engineers. A |
書誌情報 |
巻 61,
号 582,
p. 55-61,
発行日 1995-02-25
|