Item type |
デフォルトアイテムタイプ(フル)(1) |
公開日 |
2007-09-16 |
タイトル |
|
|
タイトル |
乾燥砂の繰り返し単純セン断特性に関する実験的研究 |
|
言語 |
ja |
タイトル |
|
|
タイトル |
An Experimental study on the Characteristics of Repetitional Simple Shear of Dry Sand |
|
言語 |
en |
作成者 |
許, 光瑞
加藤, 進
大城, 林
Kyo, Kozui
Kato, Susumu
Oshiro, Hayashi
|
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Dry Sand |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Simple Shear Test |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Repetitional Shearing |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Experimental Study |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Relative Density |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Interparticle Friction Angle |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Damping Factor |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Shearing Modulus |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
The characteristics of repetitional simple shear test of soils are studied mostly in the case of dynamic soil test, and hardly in the case of static soil test. While in practical case, sometimes it is necessary to obtain some soil data using the general type (static type) of simple shear test apparatus. The authors, in view of the latter case, conducted experimentally on the repetitional simple shear test in the range of large shearing strain γ=1~5% using the general type of simple shear test apparatus.\nThe experiment was conducted in three kind of relative densities (Loose state: D_r=40%, Medium state: D_r=60%, Dense state: D_r=80%), and air dry TOYOURA uniform sand was used. Two cases of shearing test were conducted, such as : 1) Singular direction shearing (Usual test), 2) Repetitional shearing under constant cycles.\nThe following results are obtained : 1) The interparticle friction angle of sand φ_μ is obtained in the range of φ_μ = 18.5~25.4 (°). The smaller value was obtained in the cases of increasing the normal stress applied in simple shear test σ_v, or decreasing the relative density D_r. 2) The equivalent hysteretic damping factor h is shown the range of h=20~29 (%), the value h increases at larger repetitional shear strain γ_a, or at smaller normal stress applied in simple shear test σ_v. 3) The relationship between equivalent hysteretic damping h and shearing modulus G are approximately linear at nearly 10 cycles. 4) It could be considered that the change of the repetitional shearing characteristics are influenced not only by the change of rearrangement of particles due to loading but aslo by the change of interparticle friction angle φ_μ owing to particle crushing. |
内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
紀要論文 |
出版者 |
|
|
言語 |
ja |
|
出版者 |
琉球大学工学部 |
言語 |
|
|
言語 |
jpn |
資源タイプ |
|
|
資源タイプ |
departmental bulletin paper |
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
識別子 |
|
|
識別子 |
http://hdl.handle.net/20.500.12000/1987 |
|
識別子タイプ |
HDL |
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
0389-102X |
収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AN0025048X |
収録物名 |
|
|
言語 |
ja |
|
収録物名 |
琉球大学工学部紀要 |
書誌情報 |
号 34,
p. 197-207
|